English Thai

Chain Driven Belt
K2 Type A4, A3 Type K2W, A2W Type
F2, A2 Type S Type Chain Driven Belt
    RR, RRW Type

These belts are made by fitting chains to both side of ordinary wire conveyor belt. The belt and chain are synchronized through stays (cross supports).

Because chain is drive by sprocket, meandering does not occur.
Various types of chain can be applied by adjusting belt pitch.

It is easy to attach side guard and product stopper in combination with chain and stay.

1. Type of stay / Stay pin type
The step-cut round rod (stay pin) is fitted to chain at both sides, and the thickness of spiral is adjusted so that the round rod passed inside the spiral.


2. Attachment type
- Flat bar type
Chain with attachment is used. Flat bar is fitted to attachment at both sides, The flat bar is passed inside the spiral (as with stay pin type) or the belt is put on the flat bar. Spacer must be provided between the attachments and the flat bar so that the belt is located in the chain center.

- Angle channel type
This type is used to prevent deflection in case chain c/c is wide but support rail can not be installed. The same installation procedure as that applied to the flat bar is applied.

- Pipe type
Similar to angle type. With pipe type, however, it is necessary to crush pipe ends so as to fit to the attachment. If EP type chain is used, the same assembling procedure as that

With Large Spiral

Attachment type


Constant Thickness With Large Spiral With Triangular Spiral

Applicable belts
It is possible to fit to belts of almost all types, including woven wire rope mesh type.

Selection of wire conveyor belt with chain

1. Belt selection
Select the belt type, wire diameter and pitch according to type, shape, size, and weight of products.

2. Selection of chain and support
Select the chain and stay according to product conditions, belt width, length, speed, machine layout, etc.


With angle product stopper With slide guard, angle product stopper


Technical Terms: - Edge Treatment
                              - Belt Endless
                              - Engineering

Go Top
Northern Region Industrial Estate 89/2 Moo 4, Highway No. 11 Tambol Banklang,
Amphur Muang Lamphun 51000 Thailand
Tel. : +66 (0) 53 581516-8 Fax. : +66 (0) 53 581519
Email: info@swn.co.th
Copy right 2011 @ swn.co.th - All Rights Reserved
Bangkok Office
6A2, Bangna Thani Building
1/12 Soi Bangna-Trad 34, Bangna-Trad Rd.,
km.3, South Bangna, Bangkok ,10260, Thailand
Tel : +66 (0) 2361-3741
Fax: +66 (0) 2361-3740